RIGOL DSG3000 Series - Manual (Page 55)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-35
[:SOURce]:IQ:TRIGger:DELay
Syntax [:SOURce]:IQ:TRIGger:DELay <value>
[:SOURce]:IQ:TRIGger:DELay?
Description Set the external trigger delay of IQ wave table.
Query the external trigger delay of IQ wave table.
Parameter Name Type Range Default
<value> Integer 0 to 65535 0
Explanation  The external delay that is the delay of the response to a trigger when the
external trigger signal arrives.
 This command is valid only when selecting "Ext" trigger mode. <value>
describes the number of points (
d
N ). The actual time (
d
T ) can be obtained
according to the current sample rate (
a
S
):
a d d
S N T
= .
 After the external delay is set, you can use the up/down direction keys or knob
to modify the delay at the current step. You can query or set the current step
using the [:SOURce]:IQ:TRIGger:DELay:STEP command.
Return Format The query returns the external trigger delay, for example, 300.
Example :IQ:TRIG:DEL 300
:IQ:TRIG:DEL?
Related
Commands
[:SOURce]:IQ:TRIGger:DELay:STEP
[:SOURce]:IQ:TRIGger:MODe
[:SOURce]:IQ:TRIGger:DELay:STEP
Syntax [:SOURce]:IQ:TRIGger:DELay:STEP <value>
[:SOURce]:IQ:TRIGger:DELay:STEP?
Description Set the external trigger delay step of IQ wave table.
Query the external trigger delay step of IQ wave table.
Parameter Name Type Range Default
<value> Integer 1 to 10000 1
Explanation After setting the external delay step, you can use the up/down direction keys or knob
to modify the external delay at the current step. At this point, you can query or reset
the external delay using the [:SOURce]:IQ:TRIGger:DELay command.
Return Format The query returns the external trigger delay step, for example, 20.
Example :IQ:TRIG:DEL:STEP 20
:IQ:TRIG:DEL:STEP?
Related
Command
[:SOURce]:IQ:TRIGger:DELay