RIGOL DSG3000 Series - Manual (Page 87)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-67
[:SOURce]:PULM:DELay:STEP
Syntax [:SOURce]:PULM:DELay:STEP <value>
[:SOURce]:PULM:DELay:STEP?
Description Set the pulse delay step of the double pulse modulating signal.
Query the pulse delay step of the double pulse modulating signal.
Parameter Name Type Range Default
<value> Real 10ns to 10s 100us
Explanation  When <value> is set in "Number" form, the default unit is s. Besides, <value>
can also be set in "Number + Unit" form, for example, 2000ms.
 The default unit of the return value is s.
 After setting the pulse delay step, you can use the up/down direction keys or
knob to modify the delay at the current step. At this point, you can query or set
the pulse delay using the [:SOURce]:PULM:DELay command.
Return Format The query returns the pulse delay step of the double pulse modulating signal, for
example, 2.
Example :PULM:DEL:STEP 2000ms
:PULM:DEL:STEP?
Related
Command
[:SOURce]:PULM:DELay