RIGOL DSG3000 Series - Manual (Page 148)

RIGOL Chapter 2 Command System
2-128 DSG3000 Programming Guide
:SYSTem:PRESet
Syntax :SYSTem:PRESet
Description Reset the instrument to the preset state (the settings defined by
the :SYSTem:PRESet:TYPE command: FACtory or USER).
Explanation Sending this command equals to pressing Preset at the front panel, namely
recalling the default values or user-preset values related to this key.
Related
Commands
*RST
:SYSTem:POWer:ON:TYPE
:SYSTem:PRESet:TYPE
:SYSTem:PRESet:TYPE
Syntax :SYSTem:PRESet:TYPE FACtory|USER
:SYSTem:PRESet:TYPE?
Description Select the preset type of the system.
Query the preset type of the system.
Parameter Name Type Range Default
FACtory|USER Discrete FACtory|USER NULL
Explanation  When the power-on setting is set to "Preset", the instrument loads the
specified preset type ("Factory" or "User") after start-up.
 Pressing Preset at the front panel will recall the specified preset type.
 When the preset type is set to "User", you can use the :SYSTem:PRESet:SAVE
command to save the current system configuration.
Return Format The query returns FACTORY or USER.
Example :SYST:PRES:TYPE USER
:SYST:PRES:TYPE?
Related
Commands
:SYSTem:POWer:ON:TYPE
:SYSTem:PRESet:SAVE