RIGOL DSG3000 Series - Manual (Page 151)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-131
:TRIGger[:SWEep][:IMMediate]
Syntax :TRIGger[:SWEep][:IMMediate]
Description Trigger a RF sweep immediately.
Explanation When the "Trig Mode" or "Point Trig" mode of SWEEP is set to "Bus" and the trigger
conditions are met, the instrument starts a RF sweep within the sweep period or
sweeps a point and then stops each time this command is sent.
Example :TRIG:SWE
Related
Command
*TRG