RIGOL DSG3000 Series - Manual (Page 86)

RIGOL Chapter 2 Command System
2-66 DSG3000 Programming Guide
[:SOURce]:PULM:DELay
Syntax [:SOURce]:PULM:DELay <value>
[:SOURce]:PULM:DELay?
Description Set the delay between the start of #1 pulse and the start of #2 pulse of the double
pulse modulating signal.
Query the delay between the start of #1 pulse and the start of #2 pulse of the
double pulse modulating signal.
Parameter Name Type Range Default
<value> Real 20ns to 170s-20ns 600us
Explanation  You can use this command to set the pulse delay when the modulation source
is set to "Int" and the pulse mode is set to "Double". Otherwise, this
command is invalid.
 When <value> is set in "Number" form, the default unit is s. Besides,
<value> can also be set in "Number + Unit" form, for example, 2000ms.
 The default unit of the return value is s.
 After setting the pulse delay, you can use the up/down direction keys or knob
to modify the delay at the current step. At this point, you can query or set the
current step using the [:SOURce]:PULM:DELay:STEP command.
Return Format The query returns the pulse delay of the double pulse modulating signal, for
example, 2.
Example :PULM:DEL 2000ms
:PULM:DEL?
Related
Commands
[:SOURce]:PULM:DELay:STEP
[:SOURce]:PULM:MODE
[:SOURce]:PULM:SOURce