Fujitronic Programmable Operation Display UG520H-x - Manual (Page 124)

2 - 55
1
No
2
3
4
5
6
7
8
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
Setting Contents
Data length 7
Parity provided
Even
Stop bit 1
CS, CD invalid
Same as POD
(normally 19200bps)
Switch Setting of Link Unit
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
19 Matsushita PLC
Memory TYPE Remarks
DT (data register) 0
X (external input relay) 1 WX as word device, read only
Y (external output relay) 2 WY as word device
R (internal relay) 3 WR as word device, special relay included
L (link relay) 4 WL as word device
LD (link register) 5
FL (file register) 6
SV (timer/counter set value) 7
EV (timer/counter elapsed value) 8
T (counter/contact) 9 Read only
C (counter/contact) 10 Read only