Fujitronic Programmable Operation Display UG520H-x - Manual (Page 66)

1 - 57
Main Menu UG420H-TC12 1998-5 -5 07:23:30
FONT
VER.1.100/1.090/1.000
JAPANESE 32
I/F DRV VER.1.100
MELSEC AnA/N/U SYSTEM PROG. VER. 1.150
System Information
Screen Data
Information
Size : 2883584
PLC Type: MITSUBISHIAnA/N/U series
Comment : Error : Stop
Time-Out : 0.50 sec
Retry : 3
Connection : 1 : 1 Baud Rate : 19200
Signal Level : RS-232C Data Length : 7
PLC Stat.No. : 0 Stop Bit : 1
Parity : Even
Send Delay : 0msec
Memory-
Card
Editor:MJ1 I/O Test
Cassette Adjust
Date:
Time:
Format Execute
S e t
Main Menu
Cassette Adjustment
Date and Time Adjustment
Format of SRAM Cassette
* Formats SRAM cassette in the present screen data type.
2000-6-26 14:38:51
Setting for SRAM cassette
When the optional SRAM cassette (UG00P-SR, UG221P-SR) is installed in the POD main unit, it is
possible to adjust the internal calendar of the SRAM cassette or to format the SRAM cassette.
Adjusting the internal calendar of SRAM cassette (Main Menu)
1)Activate the [Main Menu] screen.
Press the [Cassette Adjust] switch.
This switch is displayed when the SRAM
cassette is installed for FONT VER. 1.100/
1.090/1.000 or newer.
2)The [Cassette Adjust] screen is displayed.
3)Select the data to be changed with [ ] or [ ] switch, and change the data with [+] or [-] switch.
4)After adjusting date and time, press the [SET] switch.
5)To return to the [Main Menu] screen, press the [Main Menu] switch.
17 Operation of POD Main Menu