Fujitronic Programmable Operation Display UG520H-x - Manual (Page 99)

2 - 30 10 MITSUBISHI PLC • 4
FD 1
12
13
14
17
18
1
4
7
2
19
24
25
PLC
Minimum DIN 8pin(Male: ) D-sub 25pin(Male: )
POD (CN1)
+SD
-SD
-RTS
+RTS
-CTS
+CTS
+RD
-RD
RxD-
RxD+
TxD-
TxD+
* Use twist shielded cables.
Wiring
The following is a diagram to show the wiring of the cable which connects POD to PLC.
RS-232C
Use the cable, “UG00C-X”(3m), made by Fuji Electric Co., Ltd. in case of RS-232C connection.
RS-422
Wiring Diagram 1 (connection of the UG200C-M)
Wiring Diagram 2 (connection of the UG00C-E )
PLC
D-sub 25pin(Male: )
D-sub 25pin(Male: )
FG
SG
1
7
12
13
14
17
2
7
15
SG
16
4
17
5
18
20
21
3
18
19
24
25
POD (CN1)
+SD
-SD
+RTS
-RTS
-CTS
+CTS
+RD
-RD
+RxD
+TxD
+DSR
+DTR
-RxD
-TxD
-DSR
-DTR
* Use twist shielded cables.
According to our noise tests, the attachment of a ferrite core improves
noise voltage by 650~900V and aids in preventing communication errors.
Note
In case of direct connection with the CPU port of A/QnA series, be sure to attach the
ferrite core to the cable between POD and the CPU port of A/QnA series for noise.
A Ferrite core is sold as an optional accessory.
A noise filter(ferrite core) is sold as an optional accessory. When you buy it, specify
“ZCAT032-0930” as the model name.
POD
A/QnA Series
CPU
Ferrite core