Fujitronic Programmable Operation Display UG520H-x - Manual (Page 182)

2 - 113 42 KEYENCE PLC • 3
POD (CN1)
D-sub 25pin(Male: )
Modular Connector 6pin
FG
SD
RD
PLC
2
1
3
RS 4
CS 5
3
4
5
SG 7
* Use twist shielded cables.
123456
RD
SG
SD
Available Memory
*1 high-speed counter / current value
*2 high-speed counter comparator / set value
*3 high-speed counter comparator / contact
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Wiring
The following is a diagram to show the wiring of the cable which connects POD to PLC.
RS-232C
Wiring Diagram 1
Memory TYPE Remarks
DM (data memory) 0
CH (input/output relay) 1
TC (timer/current value) 2
CC (counter/current value) 3
TS (timer/set value) 4
CS (counter/set value) 5
T (timer/contact) 6
C (counter/contact) 7
TM (temporary data memory) 8
CTH (*1) 9 only in KV700
CTC (*2) 10 only in KV700
CT (*3) 11 only in KV700
CR (control relay) 12 only in KV700
CM (control relay) 13 only in KV700