Fujitronic Programmable Operation Display UG520H-x - Manual (Page 226)

3 - 12
Connecting Communication Interface
5
5 Connecting Communication Interface
98
150.5
13.6
25
T1 T2 SD
102.5
167.4
28.5
14.9 37.8
S T N
A B SG H L
10 1
UG02I-x UG03I-x
•
The optional communication I/F unit is installed on the rear of the POD main unit to construct individual
network. UG520/420/320/221 uses UG03I - x ; UG220 uses UG02I - x .
Warning
•
Turn OFF the power before mounting, dismounting, wiring, maintaining, or checking, otherwise, electric
shock, erratic operation, or troubles might occur.
Caution
•
Follow the directions of the operating instructions and the manual when mounting the product. If
mounting is improper, the product might drop or develop problems or erratic operations.
External Dimensions
* The dimensions are the same for all UG03I-x. * The dimensions are the same for all UG02I-x.
Refer to the Manual I/F Type Network Name
OPCN-1
T-Link
SX-BUS
Ethernet
CC-Link
FL-NET
PROFIBUS
T-Link Communications (FEH356)
OPCN-1 Communications (FEH358)
SX-BUS Communications (FEH357)
Ethernet Communications (FEH366)
CC-Link Communications (FEH355)
FL-NET Commnications (FEH367)
PROFIBUS Communications (FEH368)
UG03I-T
UG02I-T
UG03I-J
UG02I-J
UG03I-S
UG02I-S
UG03I-E (2)
UG03I-C
UG03I-E (2)
UG03I-P