Fujitronic Programmable Operation Display UG520H-x - Manual (Page 76)

2 - 7 3 FUJI PLC • 3
Notes on the direct connection with the CPU port of SX series CPU
•
Fully consider the influence of noise on the communication cable routed between the POD and MICREX-SX.
(The level of noise resistance when a ferrite core is attached to the cable: 1,000 V)
•
Fully consider the influence of noise on the cable when routing it on the board and in the unit. Route the
cable apart from the power lines.
•
The longer the communication cable, the more it is influenced by noise. Carefully route the cable.
We have 2-m, 3-m, and 5-m communication cables (UG00C-S) dedicated for connection to PLCs.
Wiring
Use an UG00C-S cable dedicated for communication to the PLC.