Fujitronic Programmable Operation Display UG520H-x - Manual (Page 185)

2 - 116
MASTER-KxxxS
MASTER-KxxxS CNET
GLOFA CNET / GM series CPU
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Memory TYPE Remarks
P (input/output) 0 Input : read only
PW as word device
M (relay) 1 MW as word device
L (link relay) 2 LW as word device
K (keep relay) 3 KW as word device
F (special relay) 4 Read only
FW as word device
T (timer/current value) 5
C (counter/set value) 6
D (data register) 7
TC (time/cortact) 9
CC (counter/contact) 10
Memory TYPE Remarks
M (internal memory) 0 MW as word device
Q (output) 1 QW as word device
I (input) 2 IW as word device
43 LG PLC
Memory TYPE Remarks
P (input/output) 0 Input : read only
M (relay) 1
L (link relay) 2
K (keep relay) 3
F (special relay) 4 Read only
T (timer/current value) 5
C (counter/set value) 6
D (data register) 7
TC (time/cortact) 9
CC (counter/contact) 10