Fujitronic Programmable Operation Display UG520H-x - Manual (Page 217)

3 - 3
Connecting the UG00P-U2
2
The UG00P-U2 (serial connection I/O unit) is connected with the UG520/420/320/221/220. It uses 16 input
points and 16 output points for connection to an external device such as a PLC. Note that the UG00P-U2
cannot be used with the UG00P-U1 simultaneously.
External Dimensions
Warning
•
Turn OFF the power before mounting, dismounting, wiring, maintaining, or checking, otherwise, electric
shock, erratic operation, or troubles might occur.
Caution
•
The serial connection I/O unit uses a link. Therefore, do not use the unit in places where high-speed
operations, urgent operations, or dangerous operations (emergency stop-type) are performed.
83
158
MJ1
FG INO IN2 IN4 IN6 IN8 IN10 IN12 IN14 COM OUT0 OUT2 OUT4 OUT6 COM1 OUT9 OUT11 OUT13 OUT15
24V DC IN1 IN3 IN5 IN7 IN9 IN11 IN13 IN15 OUT1 OUT3 OUT5 OUT7 OUT8 OUT10 OUT12 OUT14 COM2
188
90
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B15 B16 B17 B18 B19 B20
A1 A2 A3 A4
B13 B14
A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20
30
36
78
180
2 Connecting the UG00P-U2