Fujitronic Programmable Operation Display UG520H-x - Manual (Page 199)

2 - 130
Available Memory
SAIA PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available PLC
50
19200bps 19200bps
8
Baud Rate
Transmission
code
Data Length
Stop Bit 1
8
1
Item Setting of PLC
Port 0 0
Comm. Parameter of POD
PCD1 PCD
PLC Communication module Select PLC Type Wiring Diagram
RS-232C [Wiring Diagram 1]
RS-232C [Wiring Diagram 2]
RS-485 [Wiring Diagram 3] PGU port
PCD7.F120
PCD4.F110
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Memory TYPE Remarks
R (Register Word) 0
Rfp (Float) 1
T (Timer-Counter Word) 2
C (Timer-Counter Coil) 3
I (Input Bit) 4 read only
O (Output Bit) 5
F (Flag Bit) 6
S-BUS Configuration
S-BUS Mode Parity
PGU Port Number 0 (PGU port), 1 (PCD7.F120, PCD4.F110)
50 SAIA PLC