Fujitronic Programmable Operation Display UG520H-x - Manual (Page 18)

1 - 9
UG00P-D4•UG221P-D4 (FPROM Cassette)
• UG00P-D4 : for UG520, UG420, UG320
• UG221P-D4 : for UG221
Extension print circuit board to extend the memory for display data back-up.
There is 4Mbyte type.
UG00P-SR•UG221P-SR (SRAM Cassette)
• UG00P-SR : for UG520, UG420, UG320
• UG221P-SR : for UG221
Extension print circuit board to back-up the memory for sampling data,
Internal Memory and Memo Pad. There is 512kbyte type. It is also possible to
set the calendar for displaying in UGx20 at this cassette.
UG00P-MR (Card Recorder)
Reads display data created by personal computer, or works as an external
memory storage system for the memory manager and data logging functions.
UG00P-MSE (Memory Card Editor)
Application software for editing data stored in a memory card.
( For Windows 98 / Me / NT 4.0 / 2000 / XP )
UG00P-TC (Terminal Converter)
Used for connection between a UGx20 and a PLC at the RS-422/485 terminal
block.
UG00P-U1 (Extension I/O Unit)
Used as an external I/O unit for PLC. It has 16 inputs and 16 outputs.
(It can be used for UG520 and UG420.)
UG00P-U2 (Serial Extension I/O Unit)
Used as an external I/O unit for PLC. It has 16 inputs and 16 outputs.
(It can be used for UG520,UG420,UG320,UG221 and UG220.)
TB1
SW 1
CN1
3 System Composition
C N 1
FROM0
F R O M 1
J P 1
+
C N 1
P 0 2 1 7 2 -2
SANYO
CR2430
M
n O
2 - Li
CELL 3 VO LT S J A P A N
FG IN0 IN2 IN4 IN6 IN8 IN10 IN12 IN14 COM+ OUT0
IN1 IN3 IN5 IN7 IN9 IN11 IN13 IN15
OUT2 OUT 4 OUT6 COM 1 OUT9 OUT 11 OUT13 OUT15
OUT1 OUT3 OUT 5 OUT7 OUT 8 OUT10 OUT 12 OUT14 COM2
DC24V
MJ1