Fujitronic Programmable Operation Display UG520H-x - Manual (Page 195)

2 - 126
YAMATAKE PLC
48 YAMATAKE PLC
48
Available PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
PLC
MX200/MX50 RS-232C [Wiring Diagram 1]
Select PLC Type
MX Series
Wiring Diagram
9600bps
1
Even Even
1 Port
Baud Rate
Parity
Data Length
Stop Bit
Item Setting of PLC
9600bps
8 8
1 1
Transmission
Code
Comm. Parameter of POD
Memory TYPE Remarks
R (data register) 0
M (auxiliary relay) 1
L (latch relay) 2
X (input relay) 3
Y (output relay) 4
TP (timer/current value) 5
TS (timer/set value) 6
CP (counte/current value) 7
CS (counter/set value) 8
T (timer/contact) 9
C (counter/contact) 10
P (link register) 11