Fujitronic Programmable Operation Display UG520H-x - Manual (Page 43)

1 - 34
15
Analog RGB Input
(Option: UG420H-T only)
When connector CN3 of UG420H-TC (analog RGB input adapted product) is connected to a personal
computer, the screen image of the personal computer can be displayed on the UG420H-TC.
Connector pin layout
[high density D-sub 15-pin connector (female )]
Input signal specification
No signal other than the above can be displayed.
To display Windows screen, after displaying the [Control panel] dialog with the [Control panel]
command in the [Setting] menu under [Start Menu], double-click the [Screen] icon in this dialog, and
set refresh rate to 60 Hz in the [Screen property] window.
If a cable too long is used to connect between connector CN3 of UG420H-TC and the personal computer, the
screen image may be blurred due to noise. To prevent noise, it is recommended to mount a ferrite core.
1
15
5
6
11
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Input signal
Video signal (red wire)
Video signal (green wire)
Video signal (blue wire)
NC
Ground
Ground
Ground
Ground
NC
Ground
NC
NC
Horizontal synchronizing signal
Vertical synchronizing signal
NC
Color
Horizontal synchronizing
frequency
Vertical synchronizing
frequency
Input amplitude
Sample main signals
max. 262,144 colors
31.5KHz
60Hz
0.7V
Windows screen
p-p
max. 262,144 colors
24.9KHz
56Hz
0.8V
PC9801
DOS screen,
BIOS screens
p-p
max. 262,144 colors
31.5KHz
70Hz
0.7V
DOS/V
BIOS screen
p-p
Displayed number
of dots
640 480 dots 640 400 dots 720 350 dots
15 Analog RGB Input