Fujitronic Programmable Operation Display UG520H-x - Manual (Page 35)

1 - 26
Item
Drawing Method
Drawing Tool
Drawing Environment (All the UGx20 series)
Specifications
Exclusive drawing software
Name of exclusive drawing software : UG00S-CW
Personal computer : Pentium2 450 MHz or above recommended
OS : Microsoft Windows 98 / Me / NT version 4.0 / 2000 / XP
Capacity of hard disk required : free area of approx. 460MB or more
Display : resolution of 640 480 or more
(800 600 is recommended)
(for minimum installation : approx. 105Mbyte)
Item
Number of Switches
Type of Switch
Life of Switch
Specifications
8 (6 for UG221/UG220)
Pressure sensitive switches
Use of one million times or more
Function Switch Specifications (All the UGx20 series)
Item
Switch Resolution
Form
Life of Touch Panel
Touch Panel Specifications (All the UGx20 series)
Specifications
Analog, 1024(W) 1024(H)
Matrix type, UG221: 20(W) 12(H) pcs
Resistance film form
Use of one million times or more
Item
Serial Interface
for connecting PLC
(D-sub 25 pins, female)
Serial Interface 1 and 2 for
transferring data
/other external
(modular jack, 8 pins)
Printer Interface
Interface Specifications (All the UGx20 series)
Specifications
RS-232C, RS-422/485
Asynchronous type
Data length: 7, 8 bits
Parity: even, odd, none
Stop bit: 1, 2 bits
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115000bps
(115200bps is invalid for UG221/UG220.)
RS-232C, RS-422/485 (2-wire connection)
UG00P-MR, Bar code, UG00P-U2, Multi-link 2,
Temperature control network, UG-Link
Complies with centronics, half pitch 36 pins (for PC98x1)
NEC : PR201
EPSON : compatibles with ESC/P24-84 or later
HP : PCL Level 3
CBM292/293 printer (The screen copy cannot be printed out.)
8 Specifications