Fujitronic Programmable Operation Display UG520H-x - Manual (Page 220)

3 - 6
Connecting the Memory Card Recorder
3
3 Connecting the Memory Card Recorder
103 +0
-1
126.0
4.0
36
+0 -1
94.0 25.0
92.0
25.0
142.0
61.0
28.0
33.0
35
+0 -1
102 +0
-1
16.5 27.5
16.5
27.5
The memory card recorder (UG00P-MR) is connected with the UG520/420/320/221/220. The memory card
recorder supports “screen data transmission” and an “external storage device (functions for data logging and
memory manager)” for the memory card.
* For the UG400/210 Series, use the UG200P-MR or UG400P-MR.
Caution
•
Do not bundle the control line communication cable with the power cables or route it close to the power
cables. Route the control line communication cable 200 mm or more apart from the power cables.
Otherwise, the recorder may incorrectly operate due to noise.
External Dimensions
UG00P-MR, body
UG00P-MR, attachment cover Cover panel
Warning
•
Turn OFF the power before mounting, dismounting, wiring, maintaining, or checking, otherwise, electric
shock, erratic operation, or troubles might occur.