Fujitronic Programmable Operation Display UG520H-x User Manual
Page 253
Advertising
3 - 39
17. Set and tighten the 4 screws for securing the LCD module.
18. Put the inside case that has the LCD module mounted on it on the table, with the display panel down.
Put a cloth or other protective material under the product so as not to
damage the display panel.
19. Mount the inside case on the front outside case.
Be careful not to allow dust or other foreign matter to enter the gap
between the inside case and the front outside case.
* Insert the optical fiber cable in the “POWER” hole on the front outside case.
LCD module
Inside case
Screw
Front outside case
Inside case
"POWER" hole
Optical fiber cable
7 How to Replace the Backlight Unit
Advertising