Fujitronic Programmable Operation Display UG520H-x - Manual (Page 190)

2 - 121
FATEK AUTOMATION PLC
(FACON FB series)
Available PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
45
RS-232C
Even (fixed)
Signal
Baud Rate
Parity
Data Length
Stop Bit
Item Setting of PLC
9600bps
7 (fixed)
1 (fixed)
Transmission
Code
Comm. Parameter of POD
9600bps
RS-232C
FACON FB series FACON
FB series
PLC Select PLC Type Wiring Diagram
RS-232C [Wiring Diagram 1]
[Wiring Diagram 2]
RS-422 [Wiring Diagram 3]
CPU Port
Link Unit
Memory TYPE Remarks
HR (data register) 0
DR (data register) 1
X (input relay) 2
Y (output relay) 3
M (internal relay) 4
S (step relay) 5
T (timer/contact) 6 Read only
C (counter/contact) 7 Read only
RT (timer/current value) 8
RC (counter/current value) 9
DRC (counter 32bits/current value) 10
45 FATEK PLC