MITSUBISHI ELECTRIC MR-E- A/AG - Manual (Page 119)

6 - 4
6. DISPLAY AND OPERATION
Name Symbol Unit Description
Display
range
Within one-revolution
position high Cy2 100
pulse
The within one-revolution position is displayed in 100 pulse
increments of the encoder.
The value returns to 0 when it exceeds the maximum number of
pulses.
The value is incremented in the CCW direction of rotation. 0
to
1310
Load inertia moment
ratio dC 0.1
Times
The estimated ratio of the load inertia moment to the servo motor
shaft inertia moment is displayed. 0.0
to
300.0
Bus voltage Pn V The voltage (across P-N) of the main circuit converter is displayed. 0
to
450
6.2.3 Changing the status display screen
The status display item of the servo amplifier display shown at power-on can be changed by changing the
parameter No. 18 settings.
The item displayed in the initial status changes with the control mode as follows:
Control mode
Position
Position/
internal speed
Internal speed
Status display at power-on
Cumulative feedback pulses
Cumulative feedback pulses/servo motor speed
Servo motor speed