Ip http secure-protocol, No ip http secure-protocol, Ip http secure-server – NETGEAR 7300 Series User Manual

Page 102: No ip http secure-server, Ip http server, Ip http secure-protocol -36, No ip http secure-protocol -36, Ip http secure-server -36, No ip http secure-server -36, Ip http server -36

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

8-36

Switching Commands

202-10009-01_060204

ip http secure-protocol

This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.

Default

SSL3 and TLS1

Format

ip http secure-protocol [SSL3] [TLS1]

Mode

Privileged EXEC

no ip http secure-protocol

This command is used to remove protocol levels (versions) for secure HTTP.

Format

no ip http secure-protocol [SSL3] [TLS1]

Mode

Privileged EXEC

ip http secure-server

This command is used to enable the secure socket layer for secure HTTP.

Default

Disabled

Format

ip http secure-server

Mode

Privileged EXEC

no ip http secure-server

This command is used to disable the secure socket layer for secure HTTP.

Format

ip http secure-server

Mode

Privileged EXEC

ip http server

This command enables access to the switch through the Web interface. When access is enabled,
the user can login to the switch from the Web interface. When access is disabled, the user cannot
login to the switch's Web server.

Disabling the Web interface takes effect immediately. All interfaces are effected.

Advertising