Show ip irdp, Show ip ospf, Show ip irdp -39 – NETGEAR 7300 Series User Manual

Page 221: Show ip ospf -39

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Routing Commands

9-39

202-10009-01_060204

Netdir Bcast

Indicates if IP forwards net-directed broadcasts on this interface.
Possible values are Enable or Disable.

MultiCast Fwd

Indicates the multicast forwarding administrative mode on the
interface. Possible values are Enable or Disable.

In Access Mode

Indicates the inbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.

Out Access Mode

Indicates the outbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.

show ip irdp

This command displays the router discovery information for all interfaces, or a specified interface.

Format

show ip irdp <slot/port | all>

Mode

Privileged EXEC and User EXEC

Ad Mode

Displays the advertise mode which indicates whether router dis-
covery is enabled or disabled on this interface.

Max Int

Displays the maximum advertise interval which is the maximum
time allowed between sending router advertisements from the
interface in seconds.

Min Int

Displays the minimum advertise interval which is the minimum
time allowed between sending router advertisements from the
interface in seconds.

Adv Life

Displays advertise lifetime which is the value of the lifetime field
of the router advertisement sent from the interface in seconds.

Preferences

Displays the preference of the address as a default router address,
relative to other router addresses on the same subnet.

show ip ospf

This command displays information relevant to the OSPF router. This command takes no options.

Format

show ip ospf

Mode

Privileged EXEC and User EXEC

Router ID

Is a 32 bit integer in dotted decimal format identifying the router,
about which information is displayed. This is a configured value.

Advertising