No dot1x port-control, Dot1x port-control all, No dot1x port-control all – NETGEAR 7300 Series User Manual
Page 164: No dot1x port-control -98, Dot1x port-control all -98, No dot1x port-control all -98
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-98
Switching Commands
202-10009-01_060204
Default
auto
Format
dot1x port-control {force-unauthorized | force-authorized | auto}
Mode
Interface Config
no dot1x port-control
This command sets the authentication mode to be used on the specified port to 'auto'.
Format
no dot1x port-control
Mode
Interface Config
dot1x port-control All
This command sets the authentication mode to be used on all ports. The control mode may be one
of the following.
•
force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
•
force-authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
•
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default
auto
Format
dot1x port-control all {force-unauthorized | force-authorized |
auto}
Mode
Global Config
no dot1x port-control All
This command sets the authentication mode to be used on all ports to 'auto'.
Format
no dot1x port-control all
Mode
Global Config