Chapter 9 routing commands, Routing commands, 1583compatibility – NETGEAR 7300 Series User Manual

Page 183: No 1583compatibility, Chapter 9, Routing commands -1, 1583compatibility -1, No 1583compatibility -1, Chapter 9, “routing commands, Describes the routing comma

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Routing Commands

9-1

202-10009-01_060204

Chapter 9

Routing Commands

This chapter provides detailed explanation of the Routing commands. The switch commands are
divided by functionality into these different groups:

Show commands are used to display switch settings, statistics and other information.

Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.

Copy commands are used to transfer configuration and informational files to and from the
switch.

Syntax conventions are described in

Chapter 5, “Command Line Interface Structure

.

Routing Commands

1583compatibility

This command enables OSPF 1583 compatibility.

Note:

1583 compatibility mode is enabled by default. If all OSPF routers in the routing domain

are capable of operating according to RFC 2328, OSPF 1583 compatibility mode should be
disabled.

Default

Enabled

Format

1583compatibility

Mode

Router OSPF Config

no 1583compatibility

This command disables OSPF 1583 compatibility.

Format

no 1583compatibility

Mode

Router OSPF Config

Advertising