NETGEAR 7300 Series - Manual (Page 316)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-28 IS CLI Mapping
202-10009-01_060204
Global
Config
no spanning-tree forceversion
Switching config spanningtree configuration
name <name> Global
Config spanning-tree configuration name
<name>
Global
Config
no spanning-tree configuration name
Switching config spanningtree configuration
revision <0-65535> Global
Config spanning-tree configuration revision
<0-65535>
Global
Config
no spanning-tree configuration
revision
Switching config spanningtree port mode
<slot/port/all> <enable/disbale> Interface
Config spanning-tree port mode all
Interface
Config
no spanning-tree port mode
Switching config spanningtree port mode
<slot/port/all> <enable/disbale> Global
Config spanning-tree port mode all
Global
Config
no spanning-tree port mode all
Switching config spanningtree port
migrationcheck <slot/port/all>
<enable/disable> Global
Config spanning-tree bpdumigrationcheck
{<slot/port> | all}
Global
Config
no spanning-tree
bpdumigrationcheck {<slot/port> | all}
Switching config spanningtree bridge maxage
<6-40> Global
Config spanning-tree max-age <6-40>
Global
Config
no spanning-tree max-age
Switching config spanningtree bridge
hellotime <1-10> Global
Config spanning-tree hello-time <1-10>
Global
Config
no spanning-tree hello-time
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax