No snmp-server community mode, Snmp-server community ro, Snmp-server community rw – NETGEAR 7300 Series User Manual
Page 97: Snmp-server enable traps, No snmp-server enable traps, No snmp-server community mode -31, Snmp-server community ro -31, Snmp-server community rw -31, Snmp-server enable traps -31, No snmp-server enable traps -31
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands
8-31
202-10009-01_060204
Mode
Global Config
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests
using this community are accepted. In this case the SNMP manager associated with this
community cannot manage the switch until the Status is changed back to Enable.
Format
no snmp-server community mode <name>
Mode
Global Config
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called
public).
Format
snmp-server community ro <name>
Mode
Global Config
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called
private).
Format
snmp-server community rw <name>
Mode
Global Config
snmp-server enable traps
This command enables the Authentication Flag.
Default
Enabled
Format
snmp-server enable traps
Mode
Global Config
no snmp-server enable traps
This command disables the Authentication Flag.
Format
no snmp-server enable traps