No shutdown, Shutdown all, No shutdown all – NETGEAR 7300 Series User Manual
Page 132: Snmp trap link-status, No snmp trap link-status, No shutdown -66, Shutdown all -66, No shutdown all -66, Snmp trap link-status -66, No snmp trap link-status -66
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-66
Switching Commands
202-10009-01_060204
Mode
Interface Config
no shutdown
This command enables a port.
Format
no shutdown
Mode
Interface Config
shutdown all
This command disables all ports.
Default
Enabled
Format
shutdown all
Mode
Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode
Global Config
snmp trap link-status
This command enables link status traps by interface.
Note:
This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server
enable traps linkmode’ command.
Format
snmp trap link-status
Mode
Interface Config
no snmp trap link-status
This command disables link status traps by interface.
Note:
This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server
enable traps linkmode’ command).
Format
no snmp trap link-status