NETGEAR 7300 Series - Manual (Page 144)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-78 Switching Commands
202-10009-01_060204
Format show spanning-tree [brief]
Mode Privileged EXEC and User EXEC
Bridge Priority Configured value.
Bridge Identifier
Time Since Topology Change in seconds
Topology Change Count Number of times changed.
Topology Change Boolean value of the Topology Change parameter for the switch
indicating if a topology change is in progress on any port
assigned to the common and internal spanning tree.
Designated Root
Root Path Cost Value of the Root Path Cost parameter for the common and inter-
nal spanning tree.
Root Port Identifier
Root Port Max Age Derived value
Root Port Bridge Forward Delay Derived value
Hello Time Configured value
Bridge Hold Time Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)
CST Regional Root
Regional Root Path Cost
Associated FIDs List of forwarding database identifiers currently associated with
this instance.
Associated VLANs List of VLAN IDs currenty associated with this instance.
When the “brief” optional parameter is included, this command displays spanning tree settings for
the bridge. In this case, the following details are displayed.
Bridge Priority Configured value.
Bridge Identifier
Bridge Max Age TConfigured value.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)