NETGEAR 7300 Series - Manual (Page 302)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-14 IS CLI Mapping
202-10009-01_060204
Routing config arp resptime <seconds> Global
Config arp resptime <1-10>
Global
Config
no arp resptime
Routing config arp retries Global
Config arp retries <0-10>
Global
Config
no arp retries
Routing config interface encaps <slot/port>
<ethernet/snap> Interface
Config encapsulation {<ethernet> | <snap>}
Routing config interface routing <slot/port>
<enable/disable> Interface
Config routing
Interface
Config
no routing
Routing config ip interface mtu <slot/port>
<576-1500> Interface
Config mtu <1522-9216>
Routing config ip interface netdirbcast <slot/
port> <enable/disable> Interface
Config ip netdirbcast
Interface
Config no ip netdirbcast
Routing config ip interface create <slot/
port> <ipaddr> <subnetmask> Global
Config ip address <slot/port> <ipaddr>
<subnetmask>
Routing config ip forwarding <enable |
disable> Global
Config ip forwarding
Global
Config
no ip forwarding
Routing config routing <enable | disable> Global
Config ip routing
Global
Config
no ip routing
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax