No area stub, Area stub summarylsa, No area stub summarylsa – NETGEAR 7300 Series User Manual
Page 187: Area virtual-link, No area virtual-link, No area stub -5, Area stub summarylsa -5, No area stub summarylsa -5, Area virtual-link -5, No area virtual-link -5
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
9-5
202-10009-01_060204
no area stub
This command deletes a stub area for the specified area ID.
Format
no area <areaid> stub
Mode
Router OSPF Config
area stub summarylsa
This command configures the Summary LSA mode for the stub area identified by <areaid>. The
Summary LSA mode is configured as enabled.
Default
Disabled
Format
area <areaid> stub summarylsa
Mode
Router OSPF Config
no area stub summarylsa
This command configures the default Summary LSA mode for the stub area identified by
<areaid>.
Format
no area <areaid> stub summarylsa
Mode
Router OSPF Config
area virtual-link
This command creates the OSPF virtual interface for the specified <areaid> and <neighbor>. The
<neighbor> parameter is the IP address of the neighbor.
Format
area <areaid> virtual-link <neighbor>
Mode
Router OSPF Config
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by <areaid>
and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format
no area <areaid> virtual-link <neighbor>
Mode
Router OSPF Config