Storm-control flowcontrol, No storm-control flowcontrol, Vlan – NETGEAR 7300 Series User Manual

Page 136: Storm-control flowcontrol -70, No storm-control flowcontrol -70, Vlan -70

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

8-70

Switching Commands

202-10009-01_060204

Format

no switchconfig storm-control broadcast

Mode

Global Config

storm-control flowcontrol

This command enables 802.3x flow control for the switch.

Note:

This command only applies to full-duplex mode ports.

Default

Disabled

Format

storm-control flowcontrol

Mode

Global Config

no storm-control flowcontrol

This command disables 802.3x flow control for the switch.

Note:

This command only applies to full-duplex mode ports.

Format

no storm-control flowcontrol

Mode

Global Config

vlan

This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.

Format

vlan <2-4094>

Mode

VLAN database

Table 8-2.

Broadcast Storm Recovery Thresholds

Link Speed

High

Low

10M

20

10

100M

5

2

1000M

5

2

Advertising