NETGEAR 7300 Series - Manual (Page 234)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-52 Routing Commands
202-10009-01_060204
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format show ip stats
Mode
Privileged EXEC and User EXEC
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format
show ip vlan
Mode Privileged EXEC and User EXEC
MAC Address used by Routing VLANs Is the MAC Address associated with the
internal bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing
interfaces. It will be displayed above the per-VLAN information.
VLAN ID Is the identifier of the VLAN.
Logical Interface Indicates the logical slot and port associated with the VLAN rout-
ing interface.
IP Address Displays the IP Address associated with this VLAN.
Subnet Mask Indicates the subnet mask that is associated with this VLAN.
show router rip interface
This command displays information related to a particular RIP interface.
Format show ip rip interface <slot/port>
Mode
Privileged EXEC and User EXEC
Interface Is the unit slot/port identifying each interface. This is a config-
ured value.
IP Address The IP source address used by the specified RIP interface. This is
a configured value.
Send version The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a
configured value.