Show spanning-tree vlan, Spanning-tree, No spanning-tree – NETGEAR 7300 Series User Manual

Page 149: Spanning-tree configuration name, Show spanning-tree vlan -83, Spanning-tree -83, No spanning-tree -83, Spanning-tree configuration name -83

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Switching Commands

8-83

202-10009-01_060204

Configuration Digest Key Calculated value.

Configuration Format Selector Configured value.

MST Instances

List of all multiple spanning tree instances configured on the
switch

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.

Format

show spanning-tree vlan <vlanid>

Mode

Privileged EXEC and User EXEC

VLAN Identifier

Associated Instance

Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree

spanning-tree

This command sets the spanning-tree operational mode to enabled.

Default

Disabled

Format

spanning-tree

Mode

Global Config

no spanning-tree

This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-
tree configuration is retained and can be changed, but is not activated.

Format

no spanning-tree

Mode

Global Config

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of at most 32 characters.

Advertising