NETGEAR 7300 Series - Manual (Page 152)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-86 Switching Commands
202-10009-01_060204
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal spanning
tree to the default value, i.e. 15.
Format no spanning-tree forward-time
Mode Global Config
spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default 2
Format spanning-tree hello-time <1-10>
Mode Global Config
no spanning-tree hello-time
This command sets the Hello Time parameter for the common and internal spanning tree to the
default value, i.e. 2.
Format no spanning-tree hello-time
Mode Global Config
spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less
than or equal to "2 times (Bridge Forward Delay - 1)".
Default 20
Format spanning-tree max-age <6-40>
Mode Global Config