NETGEAR 7300 Series - Manual (Page 331)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-43
202-10009-01_060204
Security config radius maxretransmit <1 -
15> Global
Config radius server retransmit <1-15>
Global
Config
no radius server retransmit
Security config radius timeout <1 - 30> Global
Config radius server timeout <1-30>
Global
Config
no radius server timeout
Security config radius accounting mode
<enable/disable> Global
Config radius accounting mode
Global
Config
no radius accounting mode
Security config radius accounting server
add <ipaddr> Global
Config radius server host {auth | acct}
<ipaddr> [<0-65535>]
Security config radius accounting server
port <ipaddr> <0 - 65535> Global
Config
Security config radius accounting server
remove <ipaddr> Global
Config
Security config radius server add <ipaddr> Global
Config
Security config radius server port <ipaddr>
<0 - 65535> Global
Config
Security config radius server remove
<ipaddr> Global
Config no radius server host {auth | acct}
<ipaddr>
Security config radius accounting server
secret <ipaddr> Global
Config radius server key {auth | acct}
<ipaddr>
Security config radius server secret
<ipaddr> Global
Config
Security config radius server primary
<ipaddr> Global
Config radius server primary <ipaddr>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax