NETGEAR 7300 Series - Manual (Page 260)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
10-18 CLI Commands: Differentiated Services
202-10009-01_060204
Match Criteria The Match Criteria fields will only be displayed if they have been
configured. They will be displayed in the order entered by the
user. These are evaluated in accordance with the class type. The
possible Match Criteria fields are: Class of Service, Destination
IP Address, Destination Layer 4 Port, Destination MAC Address,
Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Ref-
erence Class, Source IP Address, Source Layer 4 Port, Source
MAC Address, and VLAN.
Values This field displays the values of the Match Criteria.
Excluded This field indicates whether or not this Match Criteria is
excluded.
If the Class Name is not specified, this command displays a list of all defined DiffServ classes. The
following fields are displayed:
Class Name The name of this class. (Note that the order in which classes are
displayed is not necessarily the same order in which they were
created.)
Class Type The class type (all, any, or acl) indicating how the match criteria
are evaluated for this class. A class type of all means every match
criterion defined for the class is evaluated simultaneously they
must all be true to indicate a class match.For a type of any each
match criterion is evaluated sequentially and only one need be
true to indicate a class match. Class type acl rules are evaluated in
a hybrid manner, with those derived from each ACL Rule
grouped and evaluated simultaneously, while each such grouping
is evaluated sequentially.
ACL Number The ACL number used to define the class match conditions at the
time the class was created. This field is only meaningful if the
class type is acl. (Note that the contents of the ACL may have
changed since this class was created.)
Ref Class Name The name of an existing DiffServ class whose match conditions
are being referenced by the specified class definition.