NETGEAR 7300 Series - Manual (Page 240)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-58 Routing Commands
202-10009-01_060204
Mode
Interface Config
ip vrrp
This command enables the administrative mode of VRRP in the router.
Default Enabled
Format
ip vrrp
Mode Global Config
no ip vrrp
This command disables the default administrative mode of VRRP in the router.
Format
no ip vrrp
Mode
Global Config
ip vrrp mode
This command enables the virtual router configured on the specified interface. Enabling the status
field starts a virtual router. The parameter <vrID> is the virtual router ID which has an integer
value ranging from 1 to 255.
Default Disabled
Format
ip vrrp <vrID> mode
Mode Interface Config
no ip vrrp mode
This command disables the virtual router configured on the specified interface. Disabling the
status field stops a virtual router.
Format no ip vrrp <vrID> mode
Mode Interface Config