NETGEAR 7300 Series - Manual (Page 98)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-32 Switching Commands
202-10009-01_060204
Mode
Global Config
snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Enabled
Format snmp-server enable traps bcaststorm
Mode
Global Config
no snmp-server enable traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
no snmp-server enable traps bcaststorm
Mode Global Config
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link-
status’ command).
Default Enabled
Format
snmp-server enable traps linkmode
Mode Global Config
no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
Format
no snmp-server enable traps linkmode
Mode Global Config