NETGEAR 7300 Series - Manual (Page 138)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-72 Switching Commands
202-10009-01_060204
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode Interface Config
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format vlan makestatic <2-4094>
Mode
VLAN database
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 16
characters, and the ID is a valid VLAN identification number. ID range is 1-4094.
Default The name for VLAN ID 1 is always Default. The name for other
VLANs is defaulted to a blank string.
Format
vlan name <2-4094> <name>
Mode VLAN database
no vlan name
This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN
identification number. ID range is 1-4094.
Format
no vlan name <2-4094>
Mode VLAN database
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number.