NETGEAR 7300 Series - Manual (Page 215)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-33
202-10009-01_060204
no redistribute
This command configures OSPF protocol to redistribute routes from the specified source protocol/
routers.
Format
no redistribute {rip | bgp | static | connected} [met-
ric] [metric-type] [tag] [subnets]
Mode Router OSPF Config
redistribute
This command configures RIP protocol to redistribute routes from the specified source protocol/
routers. There are five possible match options. When you submit the command redistribute ospf
match <match-type> the match-type or types specified are added to any match types presently
being redistributed. Internal routes are redistributed by default.
Default value for metric not-configured
Default value for match internal
Format for OSPF as source protocol
redistribute <ospf> [metric <0-15>] [match [internal]
[external 1] [external 2] [nssa-external 1] [nssa-
external-2]]
Format for other source protocol
redistribute {bgp | static | connected} [metric <0-
15>]
Mode
Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format
no redistribute {ospf | bgp | static | connected}
[metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
Mode
Router RIP Config