No arp retries, Arp timeout, No arp timeout – NETGEAR 7300 Series User Manual
Page 193: Auto-summary, No arp retries -11, Arp timeout -11, No arp timeout -11, Auto-summary -11
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
9-11
202-10009-01_060204
Default
4
Format
arp retries <0-10>
Mode
Global Config
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode
Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-21600 seconds.
Default
1200
Format
arp timeout <15-21600>
Mode
Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format
no arp timeout
Mode
Global Config
auto-summary
This command enables the RIP auto-summarization mode.
Default
Enabled
Format
auto-summary
Mode
Router RIP Config