Conventions, Conventions -3, Logical slot/port – NETGEAR 7300 Series User Manual

Page 49

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Command Line Interface Structure

5-3

202-10009-01_060204

logical slot/port

This parameter denotes a logical slot number and logical port
number assigned. This is applicable in the case of a port-channel
(LAG). The operator can use the logical slot number and the logi-
cal port number to configure the port-channel.

Conventions

Network addresses are used to define a link to a remote host, workstation or network. Network
addresses are shown using the following syntax:

Double quotation marks such as "System Name with Spaces" set off user defined strings. If the
operator wishes to use spaces as part of a name parameter then it must be enclosed in double
quotation marks.

Empty strings (““) are not valid user defined strings.

Command completion finishes spelling the command when enough letters of a command are typed
to uniquely identify the command word. The command may be executed by typing <enter>
(command abbreviation) or the command word may be completed by typing the <tab> or <space
bar> (command completion).

The value 'Err' designates that the requested value was not internally accessible. This should never
happen and indicates that there is a case in the software that is not handled correctly.

The value of '-----' designates that the value is unknown.

Table 5-1.

Network Address Syntax

Address Type

Format

Range

ipaddr

A.B.C.D

0.0.0.0 to 255.255.255.255
(decimal)

macaddr

YY:YY:YY:YY:YY:YY

hexidecimal digit pairs

Advertising