No auto-summary, Bootpdhcprelay cidoptmode, No bootpdhcprelay cidoptmode – NETGEAR 7300 Series User Manual
Page 194: Bootpdhcprelay disable, No bootpdhcprelay disable, No auto-summary -12, Bootpdhcprelay cidoptmode -12, No bootpdhcprelay cidoptmode -12, Bootpdhcprelay disable -12, No bootpdhcprelay disable -12
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-12
Routing Commands
202-10009-01_060204
no auto-summary
This command disables the RIP auto-summarization mode.
Format
no auto-summary
Mode
Router RIP Config
bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Default
Disabled
Format
bootpdhcprelay cidoptmode
Mode
Global Config
no bootpdhcprelay cidoptmode
This command disables the circuit ID option mode for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay cidoptmode
Mode
Global Config
bootpdhcprelay disable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the system.
Default
Disabled
Format
bootpdhcprelay disable
Mode
Global Config
no bootpdhcprelay disable
This command enables the forwarding of relay requests for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay disable
Mode
Global Config