Split-horizon, No split-horizon, Trapflags – NETGEAR 7300 Series User Manual
Page 238: No trapflags, Vlan routing, No vlan routing, Split-horizon -56, No split-horizon -56, Trapflags -56, No trapflags -56
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-56
Routing Commands
202-10009-01_060204
split-horizon
This command sets the RIP split horizon mode.
Default
simple
Format
split-horizon {none | simple | poison}
Mode
Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode
Router RIP Config
trapflags
This command enables OSPF traps.
Default
Enabled
Format
trapflags
Mode
Router OSPF Config
no trapflags
This command disables OSPF traps.
Format
no trapflags
Mode
Router OSPF Config
vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
vlan routing <vlanid>
Mode
VLAN Database
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.