Clear dot1x statistics, Clear radius statistics, Dot1x defaultlogin – NETGEAR 7300 Series User Manual

Page 162: Dot1x initialize, Clear dot1x statistics -96, Clear radius statistics -96, Dot1x defaultlogin -96, Dot1x initialize -96

Advertising
background image

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

8-96

Switching Commands

202-10009-01_060204

Format

no authentication login <listname>

Mode

Global Config

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.

Format

clear dot1x statistics {<slot/port> | all}

Mode

Privileged EXEC

clear radius statistics

This command is used to clear all RADIUS statistics.

Format

clear radius statistics

Mode

Privileged EXEC

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.

Format

dot1x defaultlogin <listname>

Mode

Global Config

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid
if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.

Format

dot1x initialize <slot/port>

Mode

Privileged EXEC

Advertising