Show ip vrrp interface stats, Show ip vrrp interface stats -55 – NETGEAR 7300 Series User Manual
Page 237
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
9-55
202-10009-01_060204
show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the 7300
Series L3 Switch.
Format
show ip vrrp interface stats <slot/port> <vrID>
Mode
Privileged EXEC and User EXEC
Is the time that the virtual router has been up, in days, hours, min-
utes and seconds.
State Transitioned to Master Represents the total number of times virtual router state
has changed to MASTER.
Advertisement Received Represents the total number of VRRP advertisements received
by this virtual router.
Advertisement Interval Errors Represents the total number of VRRP advertisements
received for which advertisement interval is different than the
configured value for this virtual router.
Authentication Failure Represents the total number of VRRP packets received that don't
pass the authentication check.
IP TTL errors
Represents the total number of VRRP packets received by the vir-
tual router with IP TTL (time to live) not equal to 255.
Zero Priority Packets Received Represents the total number of VRRP packets received
by virtual router with a priority of '0'.
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the vir-
tual router with a priority of '0'
Invalid Type Packets Received Represents the total number of VRRP packets received
by the virtual router with invalid 'type' field.
Address List Errors
Represents the total number of VRRP packets received for which
address list does not match the locally configured list for the vir-
tual router.
Invalid Authentication Type Represents the total number of VRRP packets received with
unknown authentication type.
Authentication Type Mismatch Represents the total number of VRRP advertisements
received for which 'auth type' not equal to locally configured one
for this virtual router.
Packet Length Errors Represents the total number of VRRP packets received with
packet length less than length of VRRP header