NETGEAR 7300 Series - Manual (Page 115)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-49
202-10009-01_060204
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a selected interface. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Format no set gmrp interfacemode
Mode
Interface Config
set gmrp interfacemode all
This command enables GARP Multicast Registration Protocol on all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default Disabled
Format set gmrp interfacemode all
Mode
Global Config
no set gmrp interfacemode all
This command disables GARP Multicast Registration Protocol on a selected interface.
Format no set gmrp interfacemode all
Mode
Global Config
set gvrp adminmode
This command enables GVRP.
Default Disabled
Format
set gvrp adminmode
Mode Privileged EXEC