3Com Wireless LAN WX1200 - Manual (Page 125)

7
IP S
ERVICES
C
OMMANDS
Use IP services commands to configure and manage IP interfaces,
management services, the Domain Name Service (DNS), Network Time
Protocol (NTP), and aliases, and to ping a host or trace a route.
Commands by
Usage This chapter presents IP services commands alphabetically. Use Table 28
to locate the commands in this chapter based on their use.
Table 28 IP Services Commands by Usage
Type Command
IP Interface set interface on page 160
set interface dhcp-client on page 161
set interface status on page 163
display interface on page 142
display dhcp-client on page 138
clear interface on page 127
System IP Address set system ip-address on page 192
clear system ip-address on page 136
IP Route set ip route on page 167
display ip route on page 146
clear ip route on page 130
SSH Management set ip ssh server on page 171
set ip ssh on page 170
Telnet Management set ip telnet on page 171
set ip telnet server on page 172
display ip telnet on page 148
clear ip telnet on page 131